Full-size cargo and passenger van in three roof heights and three lengths. Below: who sells it near San Bernardino, what is available now, and how to choose the right configuration.
No sellers in our network are currently listed close to San Bernardino. Commercial dealers routinely deliver across Southern California, so tell us what you need and we will look more widely.
13 vehicles
XL · Passenger Van
$67,500
Stock #F26710W
Check AvailabilityBase · Cargo Van
$56,085
Stock #2026102
Check Availability
Base · Cargo Van
$52,155
Stock #F26030W
Check AvailabilityBase · Cargo Van
$59,000
Stock #F26686W
Check Availability
XL · Passenger Van
$63,275
Stock #F25446W
Check Availability
XL · Passenger Van
$63,275
Stock #F25447W
Check Availability
Base · Cargo Van
$43,765
Stock #F25720W
Check Availability
Base · Cargo Van
$53,380
Stock #F25416W
Check Availability
Base · Cargo Van
$46,810
Stock #F25719W
Check Availability
Base · Cargo Van
$46,540
Stock #F25718W
Check Availability
Base · Cargo Van
$54,690
Stock #F25516W
Check Availability
$51,020
Stock #F24902W
Check Availability
Medium Roof · Cargo Van
$53,365
Two things shape commercial vehicle demand in San Bernardino, and they pull in different directions. The city is the seat of county government, which means public agencies, municipal departments and the contractors who serve them account for a meaningful share of local fleet activity. Alongside that sits a private trade base working predominantly on repair and maintenance rather than new construction.
Public-sector work has its own buying logic. Agencies purchase through formal procurement, frequently via cooperative contracts, and they favour standardisation across departments so that parts, training and servicing stay manageable. Contractors bidding for that work often find the specification effectively set for them, and vehicle requirements written into a contract are worth reading before buying anything.
The private side looks different. Much of the housing and commercial stock here is older than in the newer cities to the west, and that produces a repair-weighted trade mix: plumbing that fails, electrical systems needing updating, roofing at end of life, and mechanical plant reaching replacement age. This is service work, and it favours organised vans over material-hauling trucks.
Rail remains a real presence. The intermodal facilities and the transport corridors running through the city sustain freight support work and the maintenance trades attached to it, which is why heavier equipment appears here in greater numbers than a purely residential service market would generate.
Operating costs are the practical advantage. Property and yard space cost less here than in the Ontario and Rancho Cucamonga corridor, which makes San Bernardino a viable base for businesses working across the wider basin. Several operators serving the western valley run their yard here for exactly that reason and accept the commute.
That cost profile also shows in the vehicles. Used equipment is a larger part of the market here than in wealthier neighbouring cities, and businesses are generally more willing to buy an older truck and maintain it than to carry new-vehicle payments. That makes inspection discipline and service history more important than usual.
County and city departments running utility bodies, dumps, and service trucks across public works, parks and water functions. Purchasing runs through formal procurement and favours standardising one chassis bodied several ways, so parts and technician knowledge stay concentrated.
Older housing and commercial stock generates steady failure-driven work. High-roof cargo vans organised for parts inventory, since the value is completing a repair on the first visit rather than returning for a fitting that was not aboard.
Ageing residential and light commercial electrical systems requiring updating rather than new installation. Vans configured as mobile workshops, with secure storage for tooling that is attractive to thieves and expensive to replace.
End-of-life roofing across older housing stock. Towing-heavy work: material to site and debris trailers away from it. Summer heat here is severe, which matters for both crew scheduling and for anything working loaded through the afternoon.
Maintenance and support work attached to the intermodal and transport corridors. Heavier chassis, service bodies with compressors and generators, and enough payload to carry parts for equipment that cannot wait for a second visit.
The freeway convergence and transport volume sustain recovery operators. Rollback and wrecker bodies on medium-duty chassis, where the body build, its certification and its maintenance record govern the purchase more than the chassis specification does.
Summer temperatures here are among the highest in the basin and regularly severe for extended periods. Cooling systems, air conditioning and battery life all suffer, and any vehicle working loaded through the afternoon should be specified with heat as a design condition rather than an occasional inconvenience.
Older neighbourhoods have narrower streets, tighter driveways and more constrained access than newer developments to the west. That penalises long-wheelbase and dual-rear-wheel vehicles on residential service work, and it is a fair argument for a shorter truck even where capacity suggests otherwise.
Vehicle and equipment security deserves more attention here than in the wealthier surrounding cities. Tool theft from work vehicles is a real operating cost, and lockable external compartments, secure internal storage and where the vehicle is kept overnight are practical considerations rather than optional extras.
Freeway access is genuinely excellent, with several major routes converging in the city. A business based here can reach most of the Inland Empire and much of the eastern Los Angeles basin comfortably, which is a large part of why the lower operating costs are worth taking advantage of.
Local guidance reviewed by the SoCal Work Trucks editorial team, last updated 2026-09-04.
Full-size cargo and passenger van in three roof heights and three lengths.
Trades that need to stand up inside the van and want organised shelving. The High Roof is the reason most plumbing and electrical fleets pick a Transit over a pickup.
Ranges across common configurations of this model. The figures for any individual vehicle depend on its cab, wheelbase, drivetrain and upfit.
These are model ranges, not a specific truck. Payload in particular varies by well over 1,000 lbs across configurations. Always confirm against the door-jamb sticker and the manufacturer documentation for the exact vehicle before you buy or load it.
Payload varies by more than 1,500 lbs across the series. A T-150 High Roof loaded with shelving, a partition and a full parts inventory can run out of payload faster than buyers expect — check the door-jamb sticker on the specific van, not the brochure.
Vehicles commonly cross-shopped against the Ford Transit.
Ford replaced the E-Series van with the Transit in 2015, and in doing so moved the American work van from a body-on-frame, standard-roof design to the tall European format that had dominated Europe for two decades. The practical consequence is simple and it is the single most important thing to understand about the vehicle: in a High Roof Transit, an average adult can stand up inside and work. In the E-Series, and in the Chevrolet Express that still uses the older format, they cannot.
That one change is why the Transit took over the trade van market. A plumber fitting a van out with shelving gains an entire working surface at standing height. An electrician can organise conduit and parts bins vertically instead of crawling over them. A mobile repair business can effectively operate a small workshop from the vehicle. None of that is possible in a standard-roof van, and no amount of extra floor length compensates for it.
The Transit line is organised around three variables that a buyer chooses independently. Series (T-150, T-250, T-350 and T-350 HD) determines weight rating and therefore payload. Roof height (Low, Medium and High) determines interior working height. Body length (Regular, Long and Extended) determines floor area and, on Extended vans, adds an extension behind the rear axle. Those three choices produce a very wide range of vehicles that all wear the same Transit badge, which is the source of most buying mistakes.
Beyond the cargo van, the Transit is sold as a Crew Van with a second row of seats, a Passenger Van seating up to fifteen, and a Cutaway and Chassis Cab for box, service and specialty upfits. The Cutaway in particular is a common base for 12 to 16 ft box bodies where a full medium-duty truck would be more vehicle than the route needs.
In Southern California specifically, the Transit benefits from the density of the Ford Pro commercial dealer network. Chassis and upfit-ready inventory is more often on the ground here than for competing brands, which matters when a vehicle is out of service and a replacement is needed in weeks rather than months. That availability advantage is frequently a bigger factor in a fleet decision than any specification difference.
Powertrain choice is comparatively straightforward. The 3.5-litre V6 in naturally aspirated and EcoBoost forms covers the great majority of commercial use. The EcoBoost is the sensible pick for consistently loaded vans and for anything regularly climbing the Cajon Pass or the grades out of the Inland Empire. All-wheel drive is available and is genuinely useful for service businesses working unpaved sites, though it costs payload and fuel economy.
Plumbing · Drain cleaning · Water treatment
Plumbers carry heavy, dense inventory — fittings, valves, sections of pipe, a drain machine — in a form that must be findable quickly at a customer’s house. A High Roof Transit with full-height shelving down both sides and a floor-mounted rack for pipe is the standard answer. The weight is what catches people out: a fully stocked plumbing van routinely carries 1,500 to 2,000 lbs of parts and equipment before the driver gets in.
Typical configuration: T-250 or T-350 High Roof, Long wheelbase, with shelving and a partition
Electrical · Low voltage · Solar · Telecom
Electrical work is about small-parts organisation and carrying long material. Conduit, ladders and cable reels do not fit the way plumbing parts do. Most electrical fleets specify a High Roof for interior bin storage plus a roof rack for conduit and ladders, and that roof load needs to be counted against payload alongside everything inside.
Typical configuration: T-250 High Roof with interior bins, roof rack and ladder access
HVAC · Refrigeration · Mechanical contracting
HVAC is the hardest van case because the loads are both heavy and bulky. A condenser, a furnace, recovery equipment and a full set of gauges and tools add up quickly, and installation crews often need to carry a complete unit to site. Many HVAC fleets run a T-350 specifically for the payload headroom, and some move to a box truck or cutaway for install crews while keeping Transits for service calls.
Typical configuration: T-350 High Roof Extended, or a Cutaway with a box body for install crews
Courier · Last-mile delivery · Medical courier
Delivery work is defined by stop count rather than load weight. What matters is how quickly a driver can get in, find the item and get out, repeated a hundred or more times a day. High Roof vans let a driver move upright inside instead of stooping, which compounds across a shift, and the low step-in height reduces cumulative strain.
Typical configuration: T-250 High Roof, Long wheelbase, with shelving sized to the parcel profile
Mobile repair · Locksmiths · Equipment service · Restoration
When the van is the business, the Transit works as a base because the upfitter ecosystem is deep and Ford publishes body-builder documentation that converters actually follow. Power, lighting, workbenches and equipment mounts are all well-trodden ground.
Typical configuration: T-350 High Roof Extended with an upfitter-installed interior and power system
General contracting · Construction · Landscaping
The Crew Van adds a second row behind the front seats with a bulkhead separating a cargo area behind, which lets a supervisor move a small crew and their tools in one vehicle. For larger crews the Passenger Van seats up to fifteen, though at that point luggage and tool space is largely gone.
Typical configuration: Transit Crew Van, or Passenger Van for crews above five
Start with roof height, because it is the decision that cannot be corrected later. If crews will work inside the van — assembling fittings, picking parts, using a bench — buy the High Roof. The most common regret we hear about is a Low or Medium Roof bought to fit an existing garage or parking structure, after which crews spend years stooping. Measure the garage; if it genuinely will not take a High Roof, the Medium Roof is the compromise, not the Low.
Then choose series by payload, and do the arithmetic properly. A T-150 is rated well below a T-350, and the shortfall is easy to consume. Shelving on both sides is typically 300 to 500 lbs. A steel partition adds 80 to 150. A roof rack with ladders adds 150 to 250. A full plumbing or HVAC parts inventory can exceed 1,500 lbs. Two crew members and fuel add another 400. It is entirely possible to specify a van that is over its rating before it leaves the upfitter, and that is both a safety problem and a liability one.
The number that matters is on the door-jamb sticker of the specific van, not in the brochure. Brochure payload figures describe a base vehicle with no options; the van in front of you may be several hundred pounds heavier. When comparing two listings, compare their stickers.
Body length is the easiest decision and the least consequential. Regular length suits urban service work and tight parking. Long is the volume seller and the safe default. Extended adds length behind the rear axle, which increases capacity but also increases rear overhang — worth thinking about for anyone regularly reversing into driveways or tight commercial loading areas.
On powertrain, the naturally aspirated V6 is adequate for lightly loaded urban work. The EcoBoost is the better buy for consistently loaded vans, for anything towing, and for routes with sustained grades, which in this region means most work that leaves the valley floor. All-wheel drive is worth it only if crews genuinely work unpaved sites; otherwise it costs payload and economy for capability that goes unused.
Finally, decide on the partition before the upfit rather than after. A full steel bulkhead protects the driver from shifting load, which is the accident nobody plans for, but it costs payload and prevents reaching through from the cab. A partition with a window and pass-through is the common compromise.
An editorial evaluation written by the SoCal Work Trucks editorial team, last reviewed 2026-09-03. It is our own assessment, not customer reviews or ratings.
The Transit is the sensible default for a Southern California trade fleet, and the burden of proof sits with any alternative. It is not the cheapest van to buy, the most economical to run, or the nicest to drive, but the combination of standing-height working space, a deep upfitter ecosystem and genuine local parts and service availability is difficult to beat. The main risk in buying one is not the vehicle — it is specifying the wrong series and discovering the payload problem after the shelving is installed.
Standing-height working space
The High Roof is the reason most trades choose a Transit. Being able to stand and work inside changes how a service van is used every single day, and no competitor advantage outweighs it for trades that pick parts on site.
The widest upfit ecosystem of any American van
Nearly every shelving manufacturer, rack maker and specialty converter supports the Transit first. That means shorter lead times, more competition on price and more installers who have done your exact configuration before.
Local availability and service depth
The Ford Pro commercial network across Southern California carries more chassis and upfit-ready stock than competing brands. When a van is off the road, that difference is measured in weeks of lost revenue.
One platform covers most of a mixed fleet
Cargo, crew, passenger and cutaway variants share a platform, so a fleet can standardise driver familiarity, parts and service across several very different jobs.
Configuration range
Three roofs, three lengths and four series mean the van can be matched closely to the work rather than the work compromised to fit the van.
Payload is easy to over-promise and under-deliver
The same configuration flexibility that is a strength is also the biggest trap. The gap between a T-150 and a T-350 is large, brochure figures describe a base van, and an upfit consumes payload faster than most buyers expect.
High Roof height creates real access problems
High Roof vans do not fit many older parking structures, drive-throughs or residential garages, and adding a roof rack makes it worse. This has to be checked against actual routes, not assumed.
Not the most economical van to run
The petrol V6 is thirstier than the four-cylinder diesels some European rivals offer, and over a high-mileage delivery duty cycle that difference is material.
Interior durability under hard use
Cabin materials are specified to a commercial price point. In fleets where several drivers share a van across shifts, interiors show wear noticeably faster than the drivetrain does.
Rear overhang on Extended models
The Extended body adds capacity behind the rear axle, which makes tight reversing and steep driveway transitions harder and increases the chance of low-speed damage.
Service intervals are conventional and most independent commercial shops in Southern California will work on a Transit, which keeps maintenance competitive and avoids the dealer-only dependency that comes with some European vans.
On used examples, the highest-value checks are the upfit rather than the drivetrain. Look for how roof racks were mounted and whether the holes were properly sealed, since water ingress around badly fitted racks is the most common expensive fault on ex-trade vans. Check the load floor for the pattern of shelving bolt holes from a previous fitout, and confirm the door-jamb payload sticker is still legible and matches the van’s configuration.
Sliding door mechanisms and rear door hinges take heavy cycle counts in delivery work. On a high-mileage ex-parcel van, operate every door repeatedly before buying — replacement is straightforward but not cheap, and a worn mechanism is a daily irritation for the driver.
Manufacturer and regulatory sources for specifications and requirements. We do not link to other vehicle-selling websites.
