Unibody compact pickup based on the Tucson crossover, with an open bed and car-like handling. Below: who sells it near Fullerton, what is available now, and how to choose the right configuration.
No sellers in our network are currently listed close to Fullerton. Commercial dealers routinely deliver across Southern California, so tell us what you need and we will look more widely.
11 vehicles
SE · Pickup
$29,840
SE · Pickup
$28,206
SE · Pickup
$26,950
Stock #LSH153129
View Original ListingSEL Base · Pickup
$25,950
Stock #TRH112042
View Original Listing
SEL Base · Pickup
$24,970
SEL Base · Pickup
$19,480
SEL Base · Pickup
$23,998
SE · Pickup
$23,198
SEL Base · Pickup
$27,995
SE · Pickup
$24,699
SE · Pickup
$18,612
Fullerton is an older north Orange County city that grew before the era of master planning, and it shows in how the place is laid out: a walkable downtown with a genuine street grid, established residential neighbourhoods surrounding it, and industrial premises concentrated towards the western side rather than dispersed.
A large state university sits within the city and functions as a substantial employer and property holder in its own right. Campus estates of that size generate continuous facilities work — building services, grounds, fit-out between academic years — on schedules built around terms rather than around a normal commercial week.
The municipal airport is an unusual asset for a city of this size and supports a general aviation services sector: maintenance businesses, avionics work, hangar operations and fuel handling. These are specialist requirements, with airside access rules that shape what vehicle can go where.
Western Fullerton retains genuine light industrial premises, and the businesses there generate the equipment servicing and goods movement that any manufacturing base does. It is modest compared with Anaheim’s district but real, and it is why the city supports more industrial trades than its residential character suggests.
Housing is mature and largely established, so the residential trades work on replacement rather than first installation. Older neighbourhoods also mean narrower streets and original driveways, which constrains vehicle size more than in the newer cities to the south.
The city sits close to the Los Angeles County line with good freeway access in several directions, which makes it a practical base for businesses working across both counties. Vehicle buying commonly happens outside the city, with Inland Empire stock a routine destination for upfitted trucks.
Building systems, grounds and fit-out work across a large educational estate, scheduled around academic terms rather than a standard week. Cargo vans and service trucks specified around campus access restrictions and permitted working hours.
Aircraft maintenance, avionics and hangar operations at the municipal airport. Airside access rules govern which vehicles may go where, and tooling security matters because aviation equipment is specialised and valuable.
Maintaining production and handling equipment across the western industrial premises. Service bodies with compressors and generators, carrying enough spares to finish a repair before a customer loses a shift.
Plumbing, electrical and roofing work across mature housing where systems are reaching the end of their lives. Organised vans sized to reach properties on older streets with short original driveways and heavy kerbside parking.
A walkable commercial core with restaurants and bars requiring regular deliveries into premises with almost no dedicated loading provision. Smaller vans and box trucks that can stop briefly on a narrow street and unload quickly.
Established neighbourhoods with mature tree cover sustain skilled maintenance and green waste removal. Pickups with trailers for routine work, with dump capacity where tree surgery produces genuine volume.
Older residential streets are narrower and driveways shorter than in the newer cities to the south, with heavy kerbside parking through much of the day. Shorter vehicles reach more properties, and that is worth more than capacity on residential service work.
Downtown loading provision is minimal, so deliveries into the walkable commercial core happen from the kerb with limited time. Vehicles that position and unload quickly are substantially more productive there.
Airport airside access is governed by its own rules on which vehicles may enter and under what conditions. Confirm the requirements for any contract involving airside work before specifying a vehicle against it.
Proximity to the county line means a lot of local businesses work across both Orange and Los Angeles counties, and journey times on those routes are governed by congestion rather than distance for much of the working day.
Local guidance reviewed by the SoCal Work Trucks editorial team, last updated 2026-09-13.
Unibody compact pickup based on the Tucson crossover, with an open bed and car-like handling.
Light-duty business use where a full-size truck is more vehicle than the job needs: sales and estimating visits, light service calls, and businesses whose staff need occasional bed use but drive mostly on road.
Ranges across common configurations of this model. The figures for any individual vehicle depend on its cab, wheelbase, drivetrain and upfit.
These are model ranges, not a specific truck. Payload in particular varies by well over 1,000 lbs across configurations. Always confirm against the door-jamb sticker and the manufacturer documentation for the exact vehicle before you buy or load it.
This is a unibody crossover with a bed, not a work truck. Payload tops out around 1,750 lbs and towing around 5,000 lbs, which is a fraction of a half-ton pickup, and the bed is too short for full sheets of plywood. Hyundai has also reportedly ended production after the 2026 model year, so factor long-term parts and resale into any multi-year fleet decision.
Vehicles commonly cross-shopped against the Hyundai Santa Cruz.
Hyundai does not sell commercial work trucks, cargo vans or chassis cabs in the United States. If you have arrived here looking for a Hyundai equivalent of an F-250 or a Silverado HD, it does not exist. The Santa Cruz is the only Hyundai with an open bed, and it is a very different kind of vehicle.
The Santa Cruz shares its unibody platform with the Tucson crossover, which is the single most important fact about it. A body-on-frame pickup has a separate ladder frame carrying the load; a unibody vehicle carries loads through the same structure that forms the passenger cabin. That makes the Santa Cruz ride and handle far better than a work truck, and makes it far less suited to heavy, concentrated or repeated commercial loads.
The numbers put the difference in perspective. Santa Cruz payload runs roughly 1,411 to 1,753 lbs depending on trim and drivetrain, with towing from about 3,500 lbs on the naturally aspirated engine to 5,000 lbs on the turbocharged version. A three-quarter-ton pickup carries two to three times as much and tows three to four times as much. Even a half-ton pickup substantially exceeds it.
The bed is about four feet long, which will not take a full sheet of plywood or drywall flat, and will not take standard lengths of pipe or conduit without overhang. For trades whose work is defined by carrying sheet goods or long material, that alone rules it out.
None of which makes it a bad vehicle — it makes it a different one. There is a genuine business case for the Santa Cruz, and it is worth stating clearly because the alternative is a business either overloading a compact pickup or overpaying for a work truck it does not need. It also has a lockable, drainable under-bed storage compartment that is genuinely useful for securing tools, which most pickups at any size lack.
It is worth being precise about where the line falls, because "light duty" is doing a lot of work in that sentence. A Santa Cruz will comfortably carry a technician, a tool bag, a stepladder and a few boxes of parts. It will carry a couple of bags of soil or a green-waste load from a small residential garden. It will not carry a pallet of pavers, a day’s worth of aggregate, or the parts inventory a plumbing or HVAC van holds. If your daily load is closer to the second list than the first, this is the wrong vehicle and no trim level fixes it.
One further consideration: multiple outlets have reported that Hyundai is ending Santa Cruz production after the 2026 model year. For a personal vehicle that is largely irrelevant. For a business planning a five-year replacement cycle, discontinued models can mean weaker resale and thinner long-term parts availability, and that belongs in the decision.
Contracting sales · Estimating · Project management · Insurance assessment
Staff who visit sites all day but rarely carry material are badly served by a full-size work truck: it costs more, uses more fuel and is harder to park. The Santa Cruz drives like a crossover, parks like one, and still has a bed for the occasional sample, ladder or piece of equipment. For this role it is genuinely the better business decision.
Typical configuration: SE or SEL front-wheel drive with the naturally aspirated engine
Pest control · Appliance service · Locksmiths · Alarm and low-voltage service
Trades whose work is diagnostic and light-tool based, where the vehicle carries a service kit rather than a parts inventory. The lockable under-bed compartment secures tools out of sight, which matters for technicians parking in residential streets all day.
Typical configuration: SEL with the under-bed storage and a tonneau cover
Mobile detailing · Photography · Inspection services · Property management
Businesses needing occasional open-bed capacity plus a comfortable, economical vehicle for long driving days across the Inland Empire. Fuel and comfort matter more here than payload, and the Santa Cruz is far better suited than a half-ton pickup.
Typical configuration: SEL or Limited with the turbocharged engine for freeway work
Multi-site management · Field supervision · Compliance and safety officers
Businesses covering the spread of Southern California put serious mileage on staff vehicles. Where those staff need occasional bed capacity but spend most of the day driving between Hemet, Riverside, Ontario and beyond, a compact pickup costs substantially less in fuel and tyres than a full-size truck and is far less tiring to drive. The saving across several vehicles and several years is real money.
Typical configuration: SEL front-wheel drive, specified for economy rather than capability
Garden maintenance · Pool service · Light landscaping
Viable only at the lighter end. Mowers, blowers and hand tools are within capability. Hauling soil, aggregate, green waste or towing a loaded dump trailer is not — those loads exceed a compact unibody pickup quickly, and this is where buyers most often get into trouble.
Typical configuration: AWD turbocharged with the tow package, kept well within its rating
The first decision is not which Santa Cruz to buy — it is whether a Santa Cruz is the right category at all. Work through it honestly. Do you carry full sheets of plywood or drywall? Standard lengths of pipe or conduit? More than about 1,500 lbs? Do you tow anything heavier than a small utility trailer? Do you need a service body, a rack or a dump bed? If the answer to any of those is yes, buy a full-size truck. A Silverado 2500HD or an F-250 will do the work; a Santa Cruz will be overloaded, and an overloaded vehicle is both a safety problem and a liability exposure.
If the answers are all no, the Santa Cruz is likely the more sensible business purchase, and you will spend less buying and running it than a truck you do not need.
On engines, the 2.5-litre naturally aspirated version is adequate for light use and cheaper to buy. The turbocharged version adds meaningful performance, raises towing from about 3,500 to 5,000 lbs, and is the better choice for anyone regularly loaded or driving Inland Empire grades. If you tow at all, buy the turbo.
HTRAC all-wheel drive is worth it for unpaved site access and is required for the highest towing rating on some configurations. Like any drivetrain addition it costs a little payload and economy, so specify it for a reason rather than by default.
Trim choice matters less than usual because the body style is fixed — every Santa Cruz is a crew cab with the same bed. Focus on the practical items: the lockable under-bed storage, a tonneau cover for security and weather, and the tow package if you will tow.
Finally, factor the reported end of production into the decision. If this is one vehicle for a specific role, it is a minor consideration. If you are standardising a fleet on it for five or more years, weigh resale and long-term parts support, and consider whether a continuing-production compact pickup better suits a fleet commitment.
An editorial evaluation written by the SoCal Work Trucks editorial team, last reviewed 2026-09-03. It is our own assessment, not customer reviews or ratings.
Judged as what it is — a comfortable, economical compact pickup for light business use — the Santa Cruz is a good vehicle and often the smarter purchase for staff who drive far more than they haul. Judged as a work truck it fails, and it is not close. The single most valuable thing a buyer can do is be honest about which of those two jobs they actually need. The reported end of production is a real consideration for fleet standardisation.
Drives and parks like a crossover
For staff covering long distances across Southern California with occasional bed use, the ride, economy and manoeuvrability are far better suited than a full-size truck, and the daily cost difference is real.
Lockable, weatherproof under-bed storage
A genuinely useful feature most pickups lack at any size. Tools stay secure and out of sight, which matters for technicians parking in residential streets all day.
Lower running costs than any work truck
Fuel, tyres and servicing all cost less than a half-ton, let alone a three-quarter-ton. For a high-mileage, low-payload role that difference compounds over a fleet.
Comfortable for long driving days
Crossover-derived interior and ride quality make it a better place to spend a full day than a commercial-trim work truck, which affects staff retention in driving-heavy roles.
Standard crew cab seating
Every Santa Cruz seats five, so it doubles as a light crew vehicle without the payload penalty a full-size crew cab carries.
Payload and towing are a fraction of a work truck
Roughly 1,750 lbs and 5,000 lbs at best, against 4,000 lbs and 22,000 lbs for a three-quarter-ton pickup. Anyone hauling material or towing equipment will exceed it.
The bed is too short for sheet goods
About four feet long — it will not take plywood or drywall flat, or standard pipe and conduit lengths without overhang. For construction trades that is disqualifying.
Unibody construction limits hard commercial use
Loads pass through the same structure as the passenger cabin. It tolerates repeated heavy or concentrated loading far less well than a body-on-frame truck.
No commercial upfit path
There is no service body, no rack system of consequence and no dump option. If your work needs any upfit, this is the wrong vehicle entirely.
Reportedly discontinued after 2026
Multiple outlets report production ending after the 2026 model year, which raises reasonable questions about resale and long-term parts support for a fleet commitment.
Mechanically the Santa Cruz shares most of its componentry with the Tucson, which is a high-volume crossover. That is good news for parts availability and for the number of shops able to service it, and it means maintenance costs behave like a car rather than a truck.
On a used example, the thing to establish is how it was used. A Santa Cruz that spent its life carrying laptops and sample cases is a very different proposition from one that was loaded to the limit with soil twice a day. Look for sagging or uneven rear ride height, suspension and tyre wear, and any signs of towing beyond its rating at the hitch.
Given the reported end of production, check resale trends before committing to a multi-unit purchase. Discontinued models can depreciate faster, which changes total cost of ownership even when the purchase price looks attractive.
Manufacturer and regulatory sources for specifications and requirements. We do not link to other vehicle-selling websites.
